What is the rated torque of the RGU2510A model? The front section of the datasheet lists a basic rated torque of 1,375 N·m, while the latter section indicates that the permissible torque load can exceed 10,000 N·m, which has raised some questions.
👤 nuoyan · 📅 2025-09-03 16:18 · 👁 410 · 💬 1
What is the rated torque of the RGU2510A model? The front section of the datasheet lists a basic rated torque of 1,375 N·m, while the latter section indicates that the permissible torque load can exceed 10,000 N·m, which has raised some questions.
💬 1 replies
👤 ams17306304033 · 2025-09-05 16:58
Data interpretation from the sample: 1. The basic dynamic rated torque (1,375 N·m) refers to the safe operating torque that the reducer’s internal gear mechanism can continuously withstand over an extended period of operation. Suitable for long-term use under typical workload conditions. 2. The maximum working torque (2,270 N·m) refers to the highest torque that the reducer can temporarily withstand for a short period of time. Suitable for applications subject to instantaneous impact loads or short-term overloads during the start-up phase. 3. Allowable Moment Load (up to 19,310 N·m): This refers to the data shown in the table below, indicating the maximum external eccentric load or bending moment that the output flange or output shaft can withstand. This value is primarily related to the strength of the bearing and the structural frame, rather than the working torque that the gear itself can transmit.
