🔧 Tech Forum

1. Types and Properties of Lubricants: High-Temperature Lubricants: It is necessary to select a high-temperature lubricant that can be used at 260°C. Lubricant performance varies with temperature; therefore, lubricants that can maintain stable lubrication under high-temperature conditions are required. Lubricant Volatilization and Degradation: Lubricants may volatilize or degrade at high temperatures, so it is essential to select a lubricant that minimizes these changes. 2. Thermal Properties of Materials: Coefficient of Thermal Expansion: The thermal expansion of the material at elevated temperatures must be taken into account. If materials have different coefficients of thermal expansion, thermal mismatch can lead to deformation or stress. Thermal Resistance: The material must maintain its mechanical properties at 260°C. Therefore, selecting a material with excellent thermal resistance is crucial. 3. Friction and Wear: High-Temperature Coefficient of Friction: As temperature increases, the coefficient of friction between materials changes. It is very important to select materials with a low coefficient of friction that remain stable at high temperatures. Wear resistance: In high-temperature environments, select materials with high wear resistance. 4. Load: Load Distribution: In high-temperature environments, uneven load distribution can lead to deformation or damage due to concentrated loading in specific areas. Dynamic Loads: It is also necessary to consider the dynamic and impact loads generated during rotation. 5. Vibration: Vibration Resistance: Vibrations generated in high-temperature environments can accelerate fatigue damage. Therefore, selecting vibration-resistant materials and designing accordingly is crucial. Vibration Absorption: It is also important to use structures or materials that can absorb vibration. 6. Environmental Conditions: Vacuum State: Under vacuum conditions, heat transfer mechanisms are limited, necessitating the use of materials with high thermal conductivity or alternative cooling strategies. Oxidation and Corrosion: Select materials that are resistant to oxidation and corrosion at high temperatures. Conclusion: To maintain stable performance at 260°C, it is necessary to consider factors such as high-temperature lubricants, materials with excellent heat resistance and low friction, uniform load distribution, vibration resistance, and thermal management under vacuum conditions. Based on a comprehensive assessment of these variables, it is crucial to select the appropriate lubrication condition and material.